- 3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome
- UL/cUL Listed for three-hour A label doors
- Meets ADA requirements
|
- Nonhanded through-bolted cylindrical chassis
- Pressure Release lever stands up to heavy abuse and resists vandalism
- Double stainless steel compression springs eliminate lever sag
- Accepts virtually all competitors’ standard cylinders and interchangeable cores
|
- Door Thickness: 1-3/4″to 2-1/4″standard. Thin door adapter kit (A30775-000-00) vailable for doors thinner than 1-3/4″, please specify door thickness. Thicker door locks also vailable, consult factory.
- Backset: 2-3/4″ standard. 2-3/8″ and 5″ also available.
- Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
- Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.
- Handing: Locks are non-handed.
- Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers vailable when specified, to no cost. 7 pin cylinders also vailable. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.
|
- Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways.
- Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts.
- Latches: 1/2″ bolt projection, UL listed with latch faceplates 2-1/4″ x 1-1/8″ with square corners standard. 3/4″ projection, UL listed latch with 2-3/4″ backset also vailable. Adjustable front standard.
- Strikes: 4-7/8″ x 1-1/4″ ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard.
- Screws: Furnished with combination screws for use in wood or metal doors and frames.
- Electrified Functions: Available in 12 or 24 VAC or VDC.
- ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1.
- UL:3 hour A label.
|
 |
Meets ADA requirements. Specially designed for barrier free application. |
 |
Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code. |
Reviews
There are no reviews yet.